prikaz prve stranice dokumenta Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad
  Download
PDF 6.43 MB
undergraduate thesis
Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad
2021. urn:nbn:hr:235:945758
Ormuž, Jan Karl
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Ormuž, J. K. (2021). Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:945758

Ormuž, Jan Karl. "Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:945758

Ormuž, Jan Karl. "Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:945758

Ormuž, J. K. (2021). 'Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 23 February 2025, https://urn.nsk.hr/urn:nbn:hr:235:945758

Ormuž JK. Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2025 February 23] Available at: https://urn.nsk.hr/urn:nbn:hr:235:945758

J. K. Ormuž, "Ispitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:945758

Please login to the repository to save this object to your list.
Metadata
TitleIspitivanje otpornosti na erozijsko trošenje PACVD prevlaka na visokolegiranim alatnim čelicima za hladan rad
Title (english)Examination the erosion resistance of PACVD coatings on cold work tool steels
AuthorJan Karl Ormuž
MentorDarko Landek (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-02-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U ovom radu je opisano trošenje tvrdih prevlaka na visokolegiranim alatnim čelicima za hladan rad K110 i K390 MC. Plazmatski potpomognutim kemijskim prevlačenjem iz parne faze (PACVD) proizvedene su tvrde prevlake TiN/TiCN i TiN/TiBN. Ispitivanje na erozijsko trošenje provedeno je određivanjem gubitka mase nakon 15 i 30 min trošenja u mlazu suhog pijeska pri upadnom kutu od 45°. Naknadno je određena debljina prevlaka kalotestom, te ispitana adhezivnost prevlaka Rockwellovom metodom utiskivanja indentora. Trošene površine su analizirane svjetlosnom mikroskopijom. Ispitivanja su pokazala bolju erozijsku otpornost kod prevučenih uzoraka u odnosu na nitrirane uzorke s utjecajem adhezivnosti i debljine prevlake na rezultate ispitivanja.
Abstract (english)
In this paper, erosive wear of hard coatings, deposited on the high-alloyed tool steels for cold work K110 and K390 MC is described. Plasma-assisted chemical vapour deposition (PACVD) was used to produce hard coatings od TiN/TiCN and TiN/TiBN. Erosion resistance tests were carried out by determinig the mass loss after 15 and 30 min of wear in the dry sand stream for an angle of incidence 45°. The tickness of coatings is detemined by ball indention test, and the adhesion of the coatings is tested by Rockwell indention test. Worn surfaces were analysed by light microscope. Tests showed higher erossion resistance of the coated samples in relation to nitride samples, with influence od adhesion and coating thickness on the test results.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:945758
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-02-24 10:24:28