Uređaj za kontrolu cijevi parogeneratora kod CANDU izvedbe nuklearnog reaktora

master's thesis

• Title (english): Device for pipe inspection in steam generator of CANDU nuclear reactor design
• Author: Marin Garković
• Mentor: Dragan Žeželj (mentor)
• Mentor: Ante Bakić (komentor)
• Granter: University of Zagreb; Faculty of Mechanical Engineering and Naval Architecture; Zagreb
• Defense date and country: 2020-05-15, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Mechanical Engineering

Abstract

U radu je prikazan razvoj uređaja namijenjenog za nerazorna ispitivanja cijevi parogeneratora u nuklearnom postrojenju CANDU izvedbe. U uvodnom dijelu rečeno je općenito o nukelarnim postrojenjima. Prikazan je način rada nuklearnih postrojenja BWR i PWR, te CANDU izvedbe. Nakon toga kratko o parogeneratorima. Na kraju uvodnog dijela predstavljena je metoda vrtložnih struja, jedna od metoda nerazornih ispitivanja koja se koristi u ovom ispitivanju. Potom, napravljena je analiza geometrije kalote referentnog parogeneratora koja ujedno predstavlja i radni prostor manipulatora. Nakon analize tržišta i postojećih rješenja, te izrade funkcijske strukture i morfološke matrice, generirana su dva koncepta. Prvi koncept zamišljen je kao manipulator stapne izvedbe čije bi temeljenje bilo na dnu kalote. Konstrukcija mu je zamišljena kao dvodijelna: postolje i stapni dio sa manipulatorskom rukom. Drugi koncept zamišljen je kao manipulator koji se sastoji od glavnog kućišta u kojem su smješteni bitni dijelovi i manipulatorske ruke. Prihvat bi bio izveden na cijevnoj stijeni sa četiri penumatska hvatača. Nakon evaluacije koncepata prema postavljenim kriterijima za daljnju razradu odabran je drugi koncept. Isti je detaljno razrađen i izrađen u CAD sustavu. Dan je detaljan opis razrađenog manipulatora, njegove konstrukcije, te načina rada pojedinih sustava kao i manipulatora u cijelosti. Nadalje, iznesen je proračun korišten tijekom razrade manipulatora. Na kraju rada prikazan je shematski način rada manipulatora u kaloti parogeneratora.

Abstract (english)

The development of a device intended for non-destructive testing of steam generator tubes in
a CANDU nuclear power plant is presented in the thesis. In the introductory part, is generally
said about nuclear plants. Next, the operating mode of the BWR and PWR nuclear facilities
and the CANDU design facility is presented. After that, briefly about steam generators. At the
end of the introductory section, the eddy-current method is presented, one of the nondestructive testing methods used in this test. Further, an analysis of the geometry of the
calotte of the reference steam generator was made, which also represents the workspace of the
manipulator. After analyzing the market and existing products, and developing a functional
structure and morphological matrix, two concepts were generated. The first concept was
conceived as a stacker manipulator whose ground would be at the bottom of the calotte. Its
construction is designed as a two-piece: stand and main part with a manipulator's arm. The
second concept is conceived as a manipulator consisting of a main housing with essential
parts and a manipulator's arm. The grip would be made on the tube sheet with four pneumatic
grippers. After evaluating the concepts according to the set criteria, the second concept was
chosen. It has been elaborated and designed in a CAD system. A detailed description of the
developed manipulator, its design, as well as the modes of operation of individual systems as
well as the manipulator as a whole is made. Furthermore, the calculations used during the
manipulator design is presented. At the end of the paper, a schematic of the manipulator
operation in the steam generator is shown.

• Keywords: manipulator; nuklearna tehnologija; konstruiranje; razvoj proizvoda; nerazorna ispitivanja
• Keywords (english): manipulator; nuclear technology; design; product development; non-destructive testing
• Language: croatian
• URN:NBN: urn:nbn:hr:235:279350
• Study programme: Title: Mechanical Engineering; Study programme type: university; Study level: graduate; Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2020-05-07 12:33:18