prikaz prve stranice dokumenta Eksperimentalna analiza svojstava materijala za taložno očvršćivanje
  Download
PDF 1.87 MB
master's thesis
Eksperimentalna analiza svojstava materijala za taložno očvršćivanje
2016. urn:nbn:hr:235:094906
Zrakić, Igor
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Zrakić, I. (2016). Eksperimentalna analiza svojstava materijala za taložno očvršćivanje (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:094906

Zrakić, Igor. "Eksperimentalna analiza svojstava materijala za taložno očvršćivanje." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:094906

Zrakić, Igor. "Eksperimentalna analiza svojstava materijala za taložno očvršćivanje." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:094906

Zrakić, I. (2016). 'Eksperimentalna analiza svojstava materijala za taložno očvršćivanje', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 April 2024, https://urn.nsk.hr/urn:nbn:hr:235:094906

Zrakić I. Eksperimentalna analiza svojstava materijala za taložno očvršćivanje [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 April 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:094906

I. Zrakić, "Eksperimentalna analiza svojstava materijala za taložno očvršćivanje", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:094906

Please login to the repository to save this object to your list.
Metadata
TitleEksperimentalna analiza svojstava materijala za taložno očvršćivanje
Title (english)Experimental analysis of properties of materials for fused deposition modeling
AuthorIgor Zrakić
MentorAna Pilipović (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Aditivni postupci razvijeni su zbog zahtjeva tržišta za što bržom, jeftinijom i kvalitetnijom izradom proizvoda. Postupak se temelji na izradi proizvoda sloj po sloj i moguće je izraditi složene geometrijske oblike. U okviru diplomskog rada pokušalo se ustanoviti parametre prerade za tiskanje poliamida taložnim očvršćivanjem. Na temelju pronađenih parametara, izrađena su ispitna tijela za rastezna i savojna svojstva. Na temelju podataka dobivenih ispitivanjem svojstava, dan je kritički osvrt.
Abstract (english)
Additive manufacuting have been developed due to demands for quicker, cheaper and better quality production of products. Method is based on making products layer by layer, and its possible to produce complex geometric shapes. Within graduation thesis adequate process parameteres for printing polyamide by fused deposition modeling will be established. Based on process parameters, it will be prepared test specimens for tensile and flexible strength. Based on data obtained by testing of mechanical properties, it will be provided a criical commentary.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:094906
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 16:48:24