Daljinski upravljan modul za zatvaranje cijevi generatora pare

master's thesis

• Title (english): Remote-controlled tube closure module for steam generators
• Author: Mario Bumbak
• Mentor: Stanko Škec (mentor)
• Granter: University of Zagreb; Faculty of Mechanical Engineering and Naval Architecture; Zagreb
• Defense date and country: 2020-12-04, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Mechanical Engineering; General Mechanical Engineering (Construction)

Abstract

U ovom radu prikazan je razvojni proces modula za čepljenje (zatvaranje) cijevi generatora pare tehnikom rolanja, na nuklearnim elektranama PWR tipa (eng. Pressurised Water Reactor). Modul za čepljenje namijenjen je INETEC Forerunner manipulatoru. Radi boljeg razumijevanja problema, na samom početku objašnjen je princip rada nuklearne elektrane te je dan generalan pregled komponenti. Opisana je inspekcija cijevi generatora pare i metoda ispitivanja vrtložnim strujama. Navedeni su kriteriji za čepljenje cijevi, te vrste oštećenja istih. Istaknut je Forerunner inspekcijski sustav s pripadajućim nastavcima, koji predstavlja nadsustav modula za čepljenje. Definirani su ciljevi razvoja, te je izrađen tehnički upitnik na temelju kojeg je generirana lista zahtjeva, sa svrhom definiranja ciljeva rada. Provedeno je istraživanje patenata i tržišta u sklopu kojeg su prikazana relevantna rješenja čepljenja cijevi, tehnikom rolanja. Na temelju liste zahtjeva izrađena je funkcijska dekompozicija modula za čepljenje prema kojoj je generirana morfološka matrica. Unutar nje navedeni su prijedlozi rješenja za parcijalne funkcije iz funkcijske dekompozicije. U fazi koncipiranja generirana su tri koncepta, koja su detaljno opisana i nad kojima je provedeno vrednovanje sa svrhom objektivnog odabira koncepta. Koncept 2 je odabran za daljnju konstrukcijsku razradu. Komponente su odabrane sukladno provedenim istraživanjima i proračunu. Konačno rješenje modelirano je u programskom paketu Autodesk Inventor 2020.

Abstract (english)

This thesis presents the development process of a remotely-controlled module for plugging steam generator tubes by rolling at pressurized water reactor (PWR) nuclear power plants. The plugging module is intended for the INETEC Forerunner manipulator. In order to better understand the problem, first, the principles of nuclear power plant operation were explained and a general overview of the components given. The inspection of steam generator tubes and eddy current test methods were then described and the degradation mechanisms of steam generator tubes and the criteria for their plugging outlined. The Forerunner inspection system along with its respective extensions, a supersystem of the plugging module, was highlighted. The goals of the module development were defined and a questionnaire prepared. Based on this questionnaire, the requirements for the definition of the research task goals were listed. Next, the research on patents and the market was conducted, in which tube plugging solutions were presented. Based on the list of the requirements, a functional decomposition of the plugging module was performed, according to which a morphological matrix was created. Within this morphological matrix, possible solutions for the individual functions, that resulted from the functional decomposition, were proposed. In the conceptualization phase, three concepts were formulated. They were described in detail and evaluated for the purpose of an objective concept selection. Finally, Concept 2 was selected for further design elaboration. The components were chosen in accordance with the research conducted and the calculations made. The final solution was modelled in the Autodesk Inventor 2020 software package.

• Keywords: Razvoj proizvoda; nuklearna elektrana; PWR; generator pare; čepljenje; cijev; modul za čepljenje cijevi
• Keywords (english): Product development; nuclear power plant; PWR; steam generator; tube plugging
• Language: croatian
• URN:NBN: urn:nbn:hr:235:375720
• Study programme: Title: Mechanical Engineering; Study programme type: university; Study level: graduate; Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access; Embargo expiration date: 2022-12-04
• Created on: 2020-12-04 10:42:52