Optimiranje parametara laserskog zavarivanja čelika za poboljšavanje

doctoral thesis

• Title (english): Optimizing of parameters for laser beam welding of heat-treatable steels
• Author: Branko Bauer
• Mentor: Slobodan Kralj (mentor)
• Committee member: Vinko Ivušić (predsjednik povjerenstva)
• Committee member: Slobodan Kralj (član povjerenstva)
• Committee member: Janez Tušek (član povjerenstva); strani drzavljanin: Nije dostupno
• Committee member: Nikša Krnić (član povjerenstva)
• Granter: University of Zagreb; Faculty of Mechanical Engineering and Naval Architecture; Zagreb
• Defense date and country: 2006-01-31, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Mechanical Engineering
• Universal decimal classification (UDC): 621 - Mechanical engineering. Nuclear technology. Machinery

Abstract

Ispitivanjem spojeva zavarenih laserom na čeliku s povećanim sadržajem ugljika otkriveno je da upotreba aktivnih zaštitnih plinskih mješavina ne djeluje bezuvjetno negativno na mehanička svojstva zavarenog spoja. U ovom radu obrađeno je istraživanje utjecaja vrste aktivne plinske mješavine na bazi argona s dodatkom kisika i/ili CO2 na geometriju i mehanička svojstva zavarenog spoja. U uvodnom dijelu rada, na temelju literaturnih podataka obrađene su fizikalne osnove i tehnologija laserskog zavarivanja. Obrađeni su utjecajni čimbenici na proces zavarivanja odnosno kvalitetu zavarenog spoja. \Navedene su metode kontrole kvalitete kod laserskog zavarivanja. Obrađena je prikladnost čelika za zavarivanje laserom. U eksperimentalnom dijelu, zavarivani su limovi od čelika za poboljšavanje 25 CrMo 4, 42 CrMo 4 i Ck 60 (DIN EN 10083-1). Debljina limova iznosila je 2 mm. Zavarivan je sučeljeni spoj. Zavarivanje je izvedeno pomoću cw Nd:YAG lasera srednje snage 2000 W, s vođenjem snopa pomoću optičkog vlakna promjera 600 μm i fokusne optike 120/120 mm koja omogućuje fokusiranje snopa na točku promjera 0,6 mm. Zaštitne plinske mješavine dovođene su kroz koaksijalnu sapnicu promjera 5 mm. Relativno gibanje izvođeno je pomoću robota "IGM limat RT 280-6". Namještena snaga iznosila je 1800 W, a gustoća snage 6,4•105 W/cm2. Pokusi su provedeni prema modelu pokusa s mješavinama. Zavari su ispitivani vizualnom i radiografskom metodom, izmjerene su geometrijske značajke zavarenog spoja, ispitivana je tvrdoća, čvrstoća, deformabilnost, žilavost, i dinamička izdržljivost. Provedena je statistička obrada rezultata mjerenja i matematičko modeliranje metodom odzivnih površina. Provedeno je ocjenjivanje kvalitete zavarenih spojeva prema HRN EN ISO 13919-1. Dobiveni su zavari visoke kvalitete, bez pojave pukotina. Dobiven je značajan utjecaj zaštitnih plinskih mješavina na geometrijski oblik zavarenog spoja, dok utjecaj na brzinu zavarivanja nije značajan. Utjecaj aktivnih plinskih mješavina na promjenu mehaničkih svojstava zavarenog spoja također se nije pokazao značajnim. Izuzetak je dinamička izdržljivost, gdje je dobiveno značajno poboljšanje s mješavinama Ar/O2 i Ar/CO2/O2 koje

Abstract (english)

Testing of laser welded joints made in steel grades containing increased content of carbon revealed that the use of active shielding gas mixtures does not necessarily have harmful effect on mechanical properties of the welded joint. This thesis studies the effects of the type of active shielding gas mixtures based on argon with additions of oxygen and/or carbon dioxide upon the geometry and mechanical properties of the welded joint. In the introduction, based on literature data, the physical bases and the laser welding technology have been discussed. Factors affecting the welding process and the quality of the welded joint have been studied. The methods used in the quality control during laser welding have been mentioned. Also, the laser weldability of steels has been discussed. In the experimental part, the heat-treatable steels of grade 25 CrMo 4, 42 CrMo 4 and Ck 60 (DIN EN 10083-1) have been welded. The sheets of 2 mm thickness have been used. Joint configuration was of butt design, and welding was done by applying cw Nd:YAG laser unit rated at 2000 W of mean power, with laser beam guidance by means of optic fiber of 0.6 mm in diameter, applying focusing optics 120/120 mm that allows beam focusing to 0.6 mm spot. Shielding mixtures were supplied through 5 mm dia. coaxial nozzle. The relative movement of the welding head was performed by "IGM limat RT 280-6" robot. The rated power was set at 1800 W level, at power density of 6.4•105 W/cm2. Trial welding was carried out according to the experimental model with mixtures. The welded joints were inspected visually and tested by applying radiographic method. The geometric features of the joint were measured. Hardness, tensile strength, deformability, impact toughness and dynamic strength were tested as well. The obtained data were statistically processed, and mathematical modeling applying the method of response surfaces was carried out. The quality of the welded joints was assessed by applying the HRN EN ISO 13919-1 standard. The produced welds were of high quality, without occurrence of cracks. The analysis revealed a significant impact of the shielding gas mixtures upon the geometric shape of the joint, whereas the effect on the welding speed was not significant. Neither was the effect of shielding mixtures upon mechanical properties of the joint significant. The exception was recorded for dynamic strength, where significant improvement was achieved when the mixtures Ar/O2 and Ar/CO2/O2 enabling root shape with reduced notch effect were applied. daju oblik korijena zavara s manjim zareznim djelovanjem.

• Keywords: Nd:YAG laser; zavarivanje; čelici za poboljšavanje; zavareni spoj; zaštitni plin; zavarljivost; kvaliteta; mehanička svojstva
• Keywords (english): Nd:YAG laser; welding; heat-treatable steel; welded joint; shielding gas; weldability; quality; machanical properties
• Language: croatian
• URN:NBN: urn:nbn:hr:235:313465
• Study programme: Title: Mechanical Engineering and Naval Architecture; Study programme type: university; Study level: postgraduate; Academic / professional title: doktor/doktorica znanosti, područje tehničkih znanosti (doktor/doktorica znanosti, područje tehničkih znanosti)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2020-11-30 14:18:49