prikaz prve stranice dokumenta Simulacija 5-osnog obradnog centra
  Download
PDF 3.84 MB
master's thesis
Simulacija 5-osnog obradnog centra
2024. urn:nbn:hr:235:313991
Butek, Emil
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Butek, E. (2024). Simulacija 5-osnog obradnog centra (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:313991

Butek, Emil. "Simulacija 5-osnog obradnog centra." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:313991

Butek, Emil. "Simulacija 5-osnog obradnog centra." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2024. https://urn.nsk.hr/urn:nbn:hr:235:313991

Butek, E. (2024). 'Simulacija 5-osnog obradnog centra', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 July 2024, https://urn.nsk.hr/urn:nbn:hr:235:313991

Butek E. Simulacija 5-osnog obradnog centra [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2024 [cited 2024 July 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:313991

E. Butek, "Simulacija 5-osnog obradnog centra", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:235:313991

Please login to the repository to save this object to your list.
Metadata
TitleSimulacija 5-osnog obradnog centra
Title (english)Simulation of 5-axis CNC machining centre
AuthorEmil Butek
MentorTomislav Staroveški (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2024-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U diplomskom radu opisani su postupci pripreme projekta revitalizacije 5-osnog obradnog centra i izrade digitalnog blizanca predmetnog stroja. U uvodnom dijelu rada opisan je zadatak te je predstavljena struktura rada. Zatim su u sljedećem poglavlju dane osnovne informacije o kinematskim strukturama obradnih centara. Nakon toga su opisani moduli predmetnog obradnog centra, izrađen je 3D model u softveru CATIA V5 te simulacijski model u sustavu LinuxCNC. U posljednjem poglavlju donesen je zaključak rada.
Abstract (english)
The thesis describes the preparation procedures of the revitalization project of the 5-axis machining center and a creation of a digital twin for the subject machine. In the introduction, the task is described and the structure of the work is presented. The next chapter provides basic information about the kinematic structures of machining centers. Following that, the modules of the subject machining center are described, a 3D model is created in CATIA V5 software and a simulation model is made in the LinuxCNC system. The final chapter concludes the thesis.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:313991
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-07-13 13:37:40