prikaz prve stranice dokumenta Investigation and Statistical Evaluation of Reinforced Aluminum Foams
  Preuzmi
PDF 1.3 MB
Znanstveni rad - Izvorni znanstveni rad
Investigation and Statistical Evaluation of Reinforced Aluminum Foams
Processes, 9 (2021), 2; 1-16. https://doi.org/10.3390/pr9020315
Bunjan, Ivana; Grilec, Krešimir; Ćorić, Danko

Citirajte ovaj rad

Bunjan, I., Grilec, K. i Ćorić, D. (2021). Investigation and Statistical Evaluation of Reinforced Aluminum Foams. Processes, 9. (2), 1-16. doi: 10.3390/pr9020315

Bunjan, Ivana, et al. "Investigation and Statistical Evaluation of Reinforced Aluminum Foams." Processes, vol. 9, br. 2, 2021, str. 1-16. https://doi.org/10.3390/pr9020315

Bunjan, Ivana, Krešimir Grilec i Danko Ćorić. "Investigation and Statistical Evaluation of Reinforced Aluminum Foams." Processes 9, br. 2 (2021): 1-16. https://doi.org/10.3390/pr9020315

Bunjan, I., Grilec, K. i Ćorić, D. (2021) 'Investigation and Statistical Evaluation of Reinforced Aluminum Foams', Processes, 9(2), str. 1-16. doi: 10.3390/pr9020315

Bunjan I, Grilec K, Ćorić D. Investigation and Statistical Evaluation of Reinforced Aluminum Foams. Processes [Internet]. 08.02.2021. [pristupljeno 12.07.2024.];9(2):1-16. doi: 10.3390/pr9020315

I. Bunjan, K. Grilec i D. Ćorić, "Investigation and Statistical Evaluation of Reinforced Aluminum Foams", Processes, vol. 9, br. 2, str. 1-16, Veljača 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:235:122170. [Citirano: 12.07.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:235:122170
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Investigation and Statistical Evaluation of Reinforced Aluminum Foams
AutorIvana Bunjan
AutorKrešimir Grilec
AutorDanko Ćorić
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
(Zavod za materijale)
(Katedra za materijale i tribologiju)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Strojarstvo
Proizvodno strojarstvo
Sažetak (engleski)
In this study, aluminum foams reinforced with different steel elements were produced by the AluLight process. The master alloy AlMgSi0.6 was used as the matrix material, titanium hydride (TiH2) powder was used as a foaming agent, and steel wire, cylindrical steel mesh and flat steel mesh were used as reinforcing elements. Reinforcements were placed inside the mold, along with the precursors, and samples were manufactured by gas releasing particles in a semi-solid state. To examine the effect of the reinforcements on specific energy absorption, quasi-static uniaxial compression tests were carried out, with a constant separation rate of 1 mm/s. From the tested results, the energy absorption per unit volume and specific energy absorption efficiency were calculated and then also statistically evaluated. The results showed that examined shapes of reinforcements affect differently specific energy absorption and its efficiency, compared to non-reinforced aluminum foams. The best result obtained was with cylindrically shaped steel mesh.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeZavršna verzija rukopisa prihvaćena za objavljivanje (postprint)
Naslov časopisaProcesses
Brojčani podacivol. 9, br. 2, str. 1-16, 315
e-ISSN2227-9717
DOIhttps://doi.org/10.3390/pr9020315
URN:NBNurn:nbn:hr:235:122170
Datum objave publikacije2021-02-08
URL dokumentahttps://www.mdpi.com/2227-9717/9/2/315
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2024-05-22 11:46:21