Prijedlog proširenja etalonske baze za umjeravanje elektroničko-mehaničkih uređaja s ticalom

undergraduate thesis

• Title (english): Proposal of new calibration method for stylus instruments
• Author: Maja Grbavac
• Mentor: Vedran Šimunović (mentor)
• Granter: University of Zagreb; Faculty of Mechanical Engineering and Naval Architecture; Zagreb
• Defense date and country: 2018-03-01, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Mechanical Engineering; Production Mechanical Engineering

Abstract

U radu je pojašnjen pojam hrapavosti površina te su opisani 2D parametri hrapavosti, a detaljnije oni koji su se umjeravali u eksperimentalnom dijelu rada. Nakon toga opisani su mjerni elektroničko-mehanički uređaji s ticalom; njihova opća konfiguracija te načini vođenja ticala. Navedene su i greške koje se mogu javiti prilikom mjerenja pomoću uređaja s ticalom. Posebno je opisan mjerni uređaj Perthometer S8P na kojem su se provodila mjerenja. Opisani su etaloni koji se koriste za umjeravanje elektroničko-mehaničkog uređaja s ticalom, a propisani su normom ISO 5436-1:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures. Uz svaku vrstu etalona navedeno je za umjeravanje kojih parametara se koristi. Također su opisani neki od nedostataka trenutno korištenih etalona te način na koji ti nedostatci utječu na umjeravanje mjernog područja uređaja s ticalom. Objašnjeni su pojmovi statički i dinamički način rada mjernog uređaja s ticalom. Iznesen je prijedlog mogućnosti proširenja etalonske baze pomoću piezo elementa. Opisan je piezo element, njegov način rada te upravljanje njegovim pomacima pomoću softvera. Također je opisana opća konfiguracija uređaja i piezo elementa te njihova međusobna interakcija koja rezultira simuliranim profilima. U posljednjem poglavlju objašnjen je način na koji se provodilo umjeravanje pomoću piezo elementa. Poglavlje je podijeljeno na dvije cjeline; dinamički način rada i statički način rada. U dinamičkom načinu rada mjerili su se simulirani profili pravokutne i trokutne geometrije, dok se u statičkom modu mjerila dubina simuliranog profila. Navedeni su parametri koji su bili potrebni za simulaciju profila i za podešavanje mjernog uređaja. Prema definiranim parametrima provedena su mjerenja te su komentirani ostvareni rezultati.

Abstract (english)

The paper firstly explains the term surface roughness and describes 2D parameters of roughness, especially those that were calibrated in the experimental part of the project. After that, the measuring stylus devices are described; their general configuration and the ways to guide the probe. Mistakes that may occur when measuring with stylus device are listed. A Perthometer S8P measuring device was especially described because it was used for measurements in the experimental part of the project. The standards used for calibration of the stylus device are described. They are defined by the norm ISO 5436-1:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures. Every standard has its own application for calibration of different roughness parameters. There are also desribed some of the shortcomings of currently used standards and how these disadvantages affect the calibration of the measuring range of the device. The concepts of static and dynamic mode of operation of the measuring device are explained. A proposition for the possibility of extending the standard base by using the piezo element is presented. The piezo element, its mode of operation and its movement control, which is provided by the software, are described. There is also a desription of general configuration of the device and the piezo element and their mutual interaction which results in simulated profiles. The last chapter explains how calibration is performed by using a piezo element. The chapter is divided into two parts; dynamic mode and static mode. In the dynamic mode, simulated profiles of rectangular and triangular geometry were measured, while in the static mode the depth of the simulated profile was measured. Parameters which were used to simulate the profile and to adjust the measuring device are listed. Measurements were performed according to the defined parameters and the obtained results were commented.

• Keywords: hrapavost; etalon; norma; elektroničko-mehanički uređaj s ticalom; statički način rada; dinamički način rada; piezo element; simulirani profil; proširenje etalonske baze
• Keywords (english): roughness; roughness standard; norm; stylus device; static mode; dynamic mode; piezo element; simulated profile; extension of roughness standard base
• Language: croatian
• URN:NBN: urn:nbn:hr:235:467448
• Study programme: Title: Mechanical Engineering; Study programme type: university; Study level: undergraduate; Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2019-05-22 21:32:59