prikaz prve stranice dokumenta Uređaj za utiskivanje žiga
  Download
PDF 2.67 MB
master's thesis
Uređaj za utiskivanje žiga
2016. urn:nbn:hr:235:684636
Slaninka, Tomislav
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Slaninka, T. (2016). Uređaj za utiskivanje žiga (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:684636

Slaninka, Tomislav. "Uređaj za utiskivanje žiga." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:684636

Slaninka, Tomislav. "Uređaj za utiskivanje žiga." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:684636

Slaninka, T. (2016). 'Uređaj za utiskivanje žiga', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 13 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:684636

Slaninka T. Uređaj za utiskivanje žiga [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 December 13] Available at: https://urn.nsk.hr/urn:nbn:hr:235:684636

T. Slaninka, "Uređaj za utiskivanje žiga", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:684636

Please login to the repository to save this object to your list.
Metadata
TitleUređaj za utiskivanje žiga
Title (english)A device for stamping stamp
AuthorTomislav Slaninka
MentorIvica Galić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-12-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog rada je konstrukcija uređaja za utiskivanje žiga na cijev. Stroj prihvaća cijevi od promjera 21 do 159 mm i na zadanoj duljini uloška cijevi utiskuje žig. Dodatni zahtjev za konstrukciju je prihvat žiga standardnih dimenzija. Analizom tržišta utvrđena su postojeća rješenja za označavanja na metalnim površinama. Na temelju funkcijske dekompozicije i morfološke matrice razvijeni su koncepti čijim se vrednovanjem došlo do smjernica za daljnju konstrukciju uređaja. Na temelju proračuna dimenzionirani su ključni dijelovi uređaja. Za ostvarivanje sile utiskivanja koristi se pneumatski cilindar, dok posmak cijevi osigurava koračni motor. U procesu konstrukcijske razrade korišten je računalni program Solidworks 2015. Na temelju sklopnog crteža izrađeni su radionički crteži dijelova uređaja.
Abstract (english)
This paper presents a pipe stamping machine. The machine is designed to take the pipe which diameter can vary from 21 mm to 159 mm and to stamp it at desired length. Additional design requirement for machine is to be able to work with standardized stamps. Solutions for similar requirements are founded by analizing the market. Further machine desing is guided by valorising the concepts based on functional decomposition and morphological matrix. Key parts of the machine are dimensioned based on calculations. Stamping force is achieved using pneumatic cylinder while movement of the pipe is ensured by stepper motor. All machine parts are designed in SolidWorks 2015. 2D drawings of machine parts are made based on assembly.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:684636
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 18:10:01