Mjerenje protoka nestandardnom oštrom prigušnicom

undergraduate thesis

• Title (english): Measurement of fluid flow with nonstandard orifice plate
• Author: Matej Čorak
• Mentor: Lovorka Grgec-Bermanec (mentor)
• Granter: University of Zagreb; Faculty of Mechanical Engineering and Naval Architecture; Zagreb
• Defense date and country: 2019-03-01, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Mechanical Engineering

Abstract

U ovom radu cilj je bio usporediti rezultate mjerenja protoka vode pomoću rotametra i oštrih prigušnica. Ispitivani mjerni uređaji ugrađeni su u cijevni sustav s kavitacijskim tokom namijenjen za istraživanja intenzifikacije procesa miješanja i obrade vode. Sustav je u razvojnoj fazi u sklopu suradnje i zajedničkih istraživanja u Laboratoriju za vodu, gorivo i mazivo na Fakultetu strojarstva i brodogradnje i Kabineta za osnove inženjerstva, Prehrambeno biotehnološkog fakulteta, Sveučilišta u Zagrebu.

Prvo je napravljen teorijski dio zadatka u kojem je opisana povijest mjerenja protoka, metode mjerenja protoka i matematička pozadina vezana uz mjerenje protoka. Nakon toga provedena su mjerenja na već postavljenoj mjernoj liniji na kojoj nije bilo mogućnosti promjene, osim mijenjanja prigušnica. Mjerenja su provedena korištenjem standardne (DN10) i nestandardne prigušnice promjera 3 mm, a svi rezultati uspoređeni su sa rezultatima dobivenim na rotametru. Kako je rotametar bio ograničujući element zbog premalog mjernog područja, rezultati su usporedivi na prve 4 pozicije jačine pumpe iz čega smo dobili 4 mjerne točke. Cilj je bio odrediti protok za svaku navedenu točku sa standardnom i nestandardnom oštrom prigušnicom. Proračun protoka proveden je prema normi ISO 5167. Za sve vrijednosti protoka određene su mjerne nesigurnosti prema ISO GUM metodi. Korištena je etalonska mjerna oprema Laboratorija za procesna mjerenja.

Abstract (english)

Main goal of this work was to compare the results of water flow measurement with rotameter and orifice plate. The tested measuring devices are installed in a cavitation pipe system designed for intensifying the process of mixing and processing water. The system is in the development phase as part of co-operation and joint research in the Laboratory for Water, Fuel and Lubricants at the Faculty of Mechanical Engineering and Naval Architecture and the Cabinet for Basic Engineering, Faculty of Food Technology, University of Zagreb. A theoretical part of the task, which describes the history of flow measurement, flow measurement method and mathematical background related to flow measurement, is first made. Then measurements were carried out on the measuring line already in place, where there was no possibility of change except for the change of the orifices plates. Measurements were performed using standard (DN10) and non-standard 3 mm diameter orifice plates, and all results were compared with the results obtained on rotameter. As the rotameter was a constraining element due to the low metering range, the results are comparable to the first four pump strength positions from which we obtained 4 metering points. The goal was to determine the flow rate for each specified point with the standard and nonstandard orifice plate. Flow calculation was performed according to ISO 5167 standard. For all flow values, measurement uncertainties according to ISO GUM method were determined. The Metrological Measurement Laboratory for Process Measurements was used.

• Keywords: protok vode; rotametar; oštre prigušnice
• Keywords (english): water flow; rotameter; orifice plate
• Language: croatian
• URN:NBN: urn:nbn:hr:235:616790
• Study programme: Title: Mechanical Engineering; Study programme type: university; Study level: undergraduate; Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2019-05-23 00:14:24