Assessment of radiative heat transfer impact on a temperature distribution inside a real industrial swirled furnace

Znanstveni rad - Izvorni znanstveni rad

• Autor: Filip Jurić
• Autor: Milan Vujanović
• Autor: Marija Živić
• Autor: Mario Holik
• Autor: Xuebin Wang
• Autor: Neven Duić
• Kolaboracija: MRRFEU-KK.01.1.1.04.0070
• Autorova ustanova: Sveučilište u Slavonskom Brodu; (Strojarski fakultet u Slavonskom Brodu); (Zavod za energetiku)
• Autorova ustanova: Sveučilište u Zagrebu; Fakultet strojarstva i brodogradnje; (Zavod za energetska postrojenja, energetiku i okoliš); (Katedra za energetska postrojenja i energetiku)
• Znanstveno / umjetničko područje, polje i grana: TEHNIČKE ZNANOSTI; Strojarstvo; Procesno energetsko strojarstvo

Sažetak (engleski)

Combustion systems will continue to share a portion in energy sectors along the cur-rent energy transition, and therefore the attention is still given to the further improvements of their energy efficiency. Modern research and development processes of combustion systems are improbable without the usage of predictive numerical tools such as CFD. The radiative heat transfer in participating media is modelled in this work with discrete transfer radiative method (DTRM) and discrete ordinates method (DOM) by finite volume discretisation, in order to predict heat transfer inside combustion chamber accurately. The DTRM trace the rays in different directions from each face of the generated mesh. At the same time, DOM is described with the angle discretisation, where for each spatial angle the radiative transport equation needs to be solved. In combination with the steady combustion model in AVL FIRE™ CFD code, both models are applied for computation of temperature distribution in a real oil-fired industrial furnace for which the experimental results are available. For calculation of the absorption coefficient in both models weighted sum of grey gasses model is used. The focus of this work is to estimate radiative heat transfer with DTRM and DOM models and to validate obtained results against experimental data and calculations without radiative heat transfer, where approximately 25% higher temperatures are achieved. The validation results showed good agreement with the experimental data with a better prediction of the DOM model in the temperature trend near the furnace outlet. Both radiation modelling approaches show capability for the computation of radiative heat transfer in participating media on a complex validation case of the combustion process in oil-fired furnace.

• Ključne riječi (engleski): radiative heat transfer; participating media; furnace; radiative absorption; combustion
• Jezik: engleski
• Vrsta publikacije: Znanstveni rad - Izvorni znanstveni rad
• Status objave: Objavljen
• Vrsta recenzije: Recenziran - međunarodna recenzija
• Verzija publikacije: Objavljena verzija rada (izdavačev PDF)
• Naslov časopisa: Thermal Science
• Brojčani podaci: vol. 26, br. 6, str. 3663-3672, TSCI200407285J
• BPC: 180 EUR
• p-ISSN: 0354-9836
• e-ISSN: 2334-7163
• DOI: https://doi.org/10.2298/TSCI200407285J
• URN:NBN: urn:nbn:hr:235:932502
• Datum objave publikacije: 2020
• Projekt: Šifra: KK.01.1.1.04.0070; Naziv (hrvatski): Razvoj sustava za ispitivanje višefaznih strujanja i izgaranja s ciljem povećanja istraživačkih aktivnosti znanstvenog i poslovnog sektora; Kratica: RESIN; Voditelj: Milan Vujanović; Pravna nadležnost: eu; Financijer: Europska komisija; Linija financiranja: European Regional Development Fund
• URL dokumenta: https://thermalscience.vinca.rs/2020/6/24
• Vrsta resursa: Tekst
• Prava pristupa: Otvoreni pristup
• Datum i vrijeme pohrane: 2024-05-22 14:18:41