Optimization of data centre waste heat integration into the low-temperature district heating networks

Znanstveni rad - Izvorni znanstveni rad

• Autor: Josip Miškić https://orcid.org/0000-0003-3133-9720
• Autor: Hrvoje Dorotić https://orcid.org/0000-0001-5836-2010
• Autor: Tomislav Pukšec https://orcid.org/0000-0002-8066-4020
• Autor: Vladimir Soldo https://orcid.org/0000-0002-8568-3220
• Autor: Neven Duić https://orcid.org/0000-0003-2376-6466
• Autorova ustanova: Sveučilište u Zagrebu; Fakultet strojarstva i brodogradnje; (Zavod za energetska postrojenja, energetiku i okoliš); (Katedra za energetska postrojenja i energetiku)
• Znanstveno / umjetničko područje, polje i grana: TEHNIČKE ZNANOSTI; Strojarstvo; Procesno energetsko strojarstvo

Sažetak (engleski)

The number of data centres (DC) in recent years is growing rapidly, and with that, the share in total consumption of electricity is growing too. A significant amount of electricity is transformed into heat energy which increases the optimal temperature in DC for component operation. This heat needs to be removed and usually, it doesn’t have any further application. Today it is recognized that waste heat can be integrated into district heating (DH) and by using it reduce the usage of conventional heat fuels. Integration of waste heat is possible in three ways: with a heat exchanger (HEX), with a booster heat pump, or with the combination of the HEX and heat pump. In this paper, a combination of HP and HEX was used. Although those utilizations are examined and implemented, there is a lack of research on the optimization of the integration of waste heat into the district heating network (DHN). To perform optimization, a thermodynamic model of the DC and a pinch analysis model were developed. In this study, a method for evaluating the economic feasibility of DC waste heat integration into DH systems is proposed. The most suitable integration technology of waste heat into DH systems by using the hourly merit order of waste heat utilization technologies based on pinch analysis is found. The connection pipe between DC and DHN is optimized, and the ideal diameter is determined considering different temperature regimes of the network: low-temperature, ultralow temperature, and neutral temperature networks. The methodology was tested using a case study of a DC in the City of Zagreb.

• Ključne riječi (engleski): District heating; Waste heat; Data centre; Pinch analysis; Optimization; Techno-economic assessment
• Jezik: engleski
• Vrsta publikacije: Znanstveni rad - Izvorni znanstveni rad
• Status objave: Objavljen
• Vrsta recenzije: Recenziran - međunarodna recenzija
• Verzija publikacije: Završna verzija rukopisa prihvaćena za objavljivanje (postprint)
• Naslov časopisa: Optimization and Engineering
• Brojčani podaci: vol. 25, str. 63-91
• BPC: 0 EUR
• p-ISSN: 1389-4420
• e-ISSN: 1573-2924
• DOI: https://doi.org/10.1007/s11081-023-09837-5
• URN:NBN: urn:nbn:hr:235:106306
• Datum objave publikacije: 2023-11-23
• Projekt: Šifra: Grant agreement ID: 857811; Naziv (hrvatski): REWARDHeat - Renewable and Waste Heat Recovery for Competitive District Heating and Cooling Networks; Naziv (engleski): REWARDHeat - Renewable and Waste Heat Recovery for Competitive District Heating and Cooling Networks; Kratica: REWARDHeat; Voditelj: Neven Duić; Pravna nadležnost: eu; Financijer: Europska komisija; Linija financiranja: Horizon 2020
• URL dokumenta: https://link.springer.com/article/10.1007/s11081-023-09837-5
• Vrsta resursa: Tekst
• Prava pristupa: Otvoreni pristup
• Datum i vrijeme pohrane: 2024-11-27 05:50:08