prikaz prve stranice dokumenta Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice
  Download
PDF 2.94 MB
undergraduate thesis
Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice
2016. urn:nbn:hr:235:711291
Prebeg, Karlo
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Prebeg, K. (2016). Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:711291

Prebeg, Karlo. "Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:711291

Prebeg, Karlo. "Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:711291

Prebeg, K. (2016). 'Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:711291

Prebeg K. Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 December 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:711291

K. Prebeg, "Konstrukcijsko rješenje varijatora s dvije cilindrične tarenice", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:711291

Please login to the repository to save this object to your list.
Metadata
TitleKonstrukcijsko rješenje varijatora s dvije cilindrične tarenice
Title (english)Design solution of CVT with two plate
AuthorKarlo Prebeg
MentorIvica Galić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog završnog rada je provesti dimenzioniranje varijatora s dvije cilindrične tarenice za opće industrijske potrebe. Pogonski stroj je trofazni kavezni asinkroni elektromotor. Kućište je predviđeno u lijevanoj izvedbi. Nakon proračuna osnovnih parametara te utvrđivanja razmaka osi pogonskog i gonjenog vratila, proračunata su oba tarna para. Zatim je provedena kontrola sva tri vratila te je proveden odabir ležajeva. Na kraju je dan proračun mehanizma za promjenu prijenosnog omjera. Unutar priloga nalaze se tehnička dokumentacija i konstrukcijsko rješenje prema zadanim parametrima.
Abstract (english)
Main goal of this paper is to carry out the sizing and design of a two plate CVT for general industrial purpose. The transmitter is driven by a three phase squirrel cage motor. The transmitter is to be put in a cast housing. After the calculation of some basic paramaters and determining the axial spacing between the driveshaft and the drivenshaft, both friction pairs are calculated. Afterwards, all three shafts were designed and the bearings were selected. In the end is the calculaction of the mechanism for varying the transmission ratio. The attachment contains the neccesary technical documentation and the design solution according to the given parameters.
Keywords
Languagecroatian
URN:NBNurn:nbn:hr:235:711291
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-22 15:54:41