prikaz prve stranice dokumenta Lijevanje remenice od aluminijske legure
No public access
master's thesis
Lijevanje remenice od aluminijske legure
2014. urn:nbn:hr:235:617708
Zadelj, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Zadelj, I. (2014). Lijevanje remenice od aluminijske legure (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:617708

Zadelj, Ivan. "Lijevanje remenice od aluminijske legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:617708

Zadelj, Ivan. "Lijevanje remenice od aluminijske legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2014. https://urn.nsk.hr/urn:nbn:hr:235:617708

Zadelj, I. (2014). 'Lijevanje remenice od aluminijske legure', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 03 May 2024, https://urn.nsk.hr/urn:nbn:hr:235:617708

Zadelj I. Lijevanje remenice od aluminijske legure [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2014 [cited 2024 May 03] Available at: https://urn.nsk.hr/urn:nbn:hr:235:617708

I. Zadelj, "Lijevanje remenice od aluminijske legure", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:235:617708

Please login to the repository to save this object to your list.
Metadata
TitleLijevanje remenice od aluminijske legure
Title (english)Casting of aluminium alloy pulley
AuthorIvan Zadelj
MentorBranko Bauer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2014-12-04, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Postupak punjenja kalupne šupljine rastaljenim metalom jedan je od najvažnijih koraka u proizvodnji kvalitetnih odljevaka, no ujedno je i jedan od onih koji su najmanje razumljivi. Kao posljedica toga, često se bazira na predviđanjima. Stoga može imati štetne posljedice na kvalitetu odljevaka. Posebna se pozornost posvećuje pravilnoj i nepravilnoj konstrukciji uljevnog sustava. Prikazan je način konstrukcije jednostavnog uljevnog sustava na jednostavan način. U okviru rada napravljene su i razne varijante uljevnih sustava za zadani model te su pritom uspoređeni rezultati obzirom na dobivenu kvalitetu odljevka. U obzir su uzete i simulacije provedene u programskom paketu QuikCAST te stvarni odljevci. Rezultati simulacije dobro se poklapaju sa rezultatima lijevanja.
Abstract (english)
The process of filling the mold cavity with molten metal is one of the most important steps in the production of high quality castings, but is also one of those who are at least understandable. As a consequence, it is often based on the predictions. Therefore, it may have harmful effects on the quality of castings. Special attention is given to the regular and irregular design of the gating system. It is shown how to design simple gating system in a simple way. Various versions of gating system for a given model were constructed. The obtained results were compared considering the quality of the casting. Simulations performed in software package QuickCAST and a real castings were taken into consideration. Simulation results are in good agreement with the casting results.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:617708
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2019-05-22 12:12:42