Strukturna analiza riječnog tankera za prijevoz tekućeg tereta

undergraduate thesis

• Title (english): Structural analysis of inland tanker
• Author: Mate Prnjak
• Mentor: Jerolim Andrić (mentor)
• Granter: University of Zagreb; Faculty of Mechanical Engineering and Naval Architecture; Zagreb
• Defense date and country: 2023-03-02, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Shipbuilding; Constructive of Floating and Maritime Structures

Abstract

U ovom završnom radu proveden je proračun konstrukcijskih elemenata presjeka glavnog rebra
tankera prema Pravilima HRB-a za unutarnju plovidbu. Proračun je proveden u dvije faze. U
prvoj su fazi analitički izračunate debljine te dimenzije elemenata koje su se potom u drugoj
fazi koristile za izradu numeričkog MKE modela. Taj je model naposljetku bilo potrebno
doraditi kako bi zadovoljio postavljene kriterije podobnosti, a kako će biti objašnjeno naknadno
kroz ovaj rad. Prilikom proračuna u prvoj fazi korišteni su već gotovi nacrti kako bi se mogao
kreirati model, ali i kako bi se definirali bitni parametri kod proračunavanja kao što su:
nepoduprti rasponi, položaji tankova, položaji težišta te razmaci konstrukcijskih elemenata.
Nakon što su svi elementi jednom bili izračunati, prema tim dimenzijama je u drugoj fazi
proračuna izrađen MKE model te su elementima dodijeljena svojstva dobivena prema HRB-u.
Potom je proveden proračun direktnom metodom; zadani su rubni uvjeti te relevantna
opterećenja kako bi se za taj model provođenjem analize dobili rezultati, odnosno odzivi u
obliku naprezanja i deformacija. Izrađeni se model sastoji od pločastih i grednih elemenata koji
su međusobno povezani čvorovima te su u interakciji. Prilikom kontrole naprezanja, u obzir su
uzeti i faktori sigurnosti na izvijanje i globalno savijanje oplate te pripadne uzdužne i poprečne
strukture na razini glavnog rebra. Na kraju druge faze je bilo potrebno izmijeniti svojstva
elemenata kako bi se zadovoljili kriteriji uzdužne čvrstoće te izvijanja. Drugim riječima,
mijenjale su se dimenzije elemenata sve dok dobivena naprezanja ne padnu ispod kritičnih,
odnosno onih kod kojih dolazi do kolapsa konstrukcije.

Abstract (english)

This study shows the calculation of inland tanker's scantlings around its main frame, where the
dimensioning is made by using set of Rules by Croatian register of shipping (CRS). The
calculations were conducted through two phases. First phase was analytical phase were the
dimensioning was made by using formulae from the Rules of CRS. Those calculated scantlings
were then used to make the FEM model, which was the second phase of the project. The model
itself required some modifications of its structure in order to satisfy the given conditions, which
will be explained later in the thesis. General arrangement and 2D schemes of the tanker were
used in order to define important parameters needed to create the model and also as an input to
the Rules. Those parameters are: spans of the elements, location of the tanks (either cargo or
ballast), location of the centers of gravity and spacing of the elements. Once all the elements
were calculated by using the Rules, FEM model was created with all the scantlings of the
elements as obtained by the CRS. The next step was to define restraints and apply loads on the
model created, as the goal of the FEM is to observe deflections and stresses on the model when
analysis is conducted. The 3D model was made by using plate and beam elements, which were
connected by nodes as they interact with each other. It was important to take safety factors into
consideration as well, especially buckling and bending safety factors, as all elements were
designed according to those types of loads. Finally, in order to achieve the criteria for
longitudinal strength and buckling, some elements of the structure were modified so they can
satisfy all the conditions, or in other words, to prevent the structure from the collapse.

• Keywords: riječni tanker; glavno rebro; Pravila HRB-a; MKE; dimenzioniranje elemenata
• Keywords (english): inland tanker; main frame; CRS Rules; FEM; hull and element scantlings
• Language: croatian
• URN:NBN: urn:nbn:hr:235:365065
• Study programme: Title: Naval Architecture; Study programme type: university; Study level: undergraduate; Academic / professional title: sveučilišni prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka brodogradnje (sveučilišni prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka brodogradnje)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2023-02-23 10:02:03