Optimizacija čeljusti kidalice

undergraduate thesis

• Title (english): Optimisation of tensile testing machine grips
• Author: Ana Kolednjak
• Mentor: Zdravko Schauperl (mentor)
• Granter: University of Zagreb; Faculty of Mechanical Engineering and Naval Architecture; Zagreb
• Defense date and country: 2022-03-02, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Mechanical Engineering; Production Mechanical Engineering

Abstract

Postupci aditivne proizvodnje sve su više zastupljeni u industrijskoj proizvodnji, a osobito u zrakoplovnoj industriji, automobilskoj industriji, medicini, dentalnoj medicini, strojogradnji i dr. Razvojem aditivnih postupaka ostvaruje se kraće vrijeme izrade, smanjuje se količina otpadnog materijala, omogućuje se izrada dijelova komplicirane geometrije te se smanjuje potreba za konvencionalnim postupcima u proizvodnji, a ponajviše u dentalnoj medicini.
Selektivno lasersko taljenje - SLM jedan je od postupaka aditivne proizvodnje koji se primjenjuje pri proizvodnji predmeta od kobalt – krom legura, Co-Cr. Aditivno proizvedene legure na bazi kobalt – kroma zahvaljujući dobrim mehaničkim svojstvima koriste se u biomedicinske svrhe, a osobito za metalne konstrukcije zubnih aparata. Tijekom ispitivanja mehaničkih svojstva Co-Cr legure statičkim vlačnim pokusom, dolazi do proklizavanja epruvete iz čeljusti kidalice. Proklizavanje onemogućuje daljnju izvedbu pokusa i dobivanje odgovarajućih rezultata. Cilj ovog rada je predložiti dizajn epruvete i pločice čeljusti kidalice kako bi se izbjeglo proklizavanje. Rad je podijeljen na teorijski i eksperimentalni dio. U teorijskom dijelu rada opisana je aditivna proizvodnja, njezin povijesni razvoj, način izrade proizvoda, klasifikacija te usporedba s konvencionalnim postupcima proizvodnje. Zatim je pobliže opisano selektivno lasersko taljenje - SLM kao jedna vrsta aditivne proizvodnje. U tom poglavlju govori se o samom postupku proizvodnje, parametrima postupka i o njezinoj primjeni. U teorijskom dijelu rada također je opisan i statički vlačni pokus i oprema potrebna za njegovo izvođenje. U eksperimentalnom dijelu rada opisani su razlozi proklizavanja epruvete te je predloženo optimalno rješenje dizajna epruvete i pločice čeljusti kidalice.

Abstract (english)

Additive production processes are increasingly represented industrial production, especially in the aerospace industry, automotive industry, medicine, dentistry, mechanical engineering and others. The development of additive procedures achieves a shorter production time, reduces the amount of waste material, enables the production of parts of complicated geometry and reduces the need for conventional procedures in production, especially in dentistry.

Selective laser melting - SLM is one of the processes of additive production used in the production of cobalt - chromium alloys, Co-Cr. Additively produced cobalt – chromium alloys, due to the convenience of mechanical properties, are used in biomedical purposes, especially for metallic structures of dental appliances. During the testing of the mechanical properties of Co-Cr alloy by static tensile test, the test specimen slips out of the jaws of the tear-off machine. Slipping prevents performance of the experiment and obtaining the corresponding results. The objective of this paper is to propose the design of the test specimen and the plate of the jaws of the tear-off machine in order to avoid slipping. The paper is divided into theoretical and experimental part. The theoretical part of the paper is about additive production, its historical development, production method, classification and comparison with conventional production methods. Selective laser melting - SLM as a type of additive production is then described in more detail. This chapter discusses the production process itself, the parameters of the process and its application. The theoretical part of the paper also describes the static tensile test and the equipment needed to perform it. In the experimental part of the paper, the reasons for the slip of the test specimen are described and the optimal solution for the design of the test specimen and the jaw plate is proposed.

• Keywords: aditivna proizvodnja; SLM postupak; Co-Cr legura; statički vlačni pokus; epruveta; čeljust
• Keywords (english): additive production; SLM process; Co-Cr alloy; static tensile test; test specimen; jaw
• Language: croatian
• URN:NBN: urn:nbn:hr:235:764902
• Study programme: Title: Mechanical Engineering; Study programme type: university; Study level: undergraduate; Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2022-02-24 17:13:03