Warning message

You do not have permission to view this resource!
prikaz prve stranice dokumenta Trošenje bokova kola pužnih prijenosnika
Access restricted to students and staff of home institution
doctoral thesis
Trošenje bokova kola pužnih prijenosnika
2013. urn:nbn:hr:235:432847
Panić, Nenad
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Panić, N. (2013). Trošenje bokova kola pužnih prijenosnika (Doctoral thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:432847

Panić, Nenad. "Trošenje bokova kola pužnih prijenosnika." Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2013. https://urn.nsk.hr/urn:nbn:hr:235:432847

Panić, Nenad. "Trošenje bokova kola pužnih prijenosnika." Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2013. https://urn.nsk.hr/urn:nbn:hr:235:432847

Panić, N. (2013). 'Trošenje bokova kola pužnih prijenosnika', Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 21 September 2024, https://urn.nsk.hr/urn:nbn:hr:235:432847

Panić N. Trošenje bokova kola pužnih prijenosnika [Doctoral thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2013 [cited 2024 September 21] Available at: https://urn.nsk.hr/urn:nbn:hr:235:432847

N. Panić, "Trošenje bokova kola pužnih prijenosnika", Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2013. Available at: https://urn.nsk.hr/urn:nbn:hr:235:432847

Please login to the repository to save this object to your list.
Metadata
TitleTrošenje bokova kola pužnih prijenosnika
Title (english)Wear of worm wheels tooth face
AuthorNenad Panić
MentorMilan Opalić (mentor)
Committee memberVinko Ivušić (predsjednik povjerenstva)
Committee memberMilan Opalić (član povjerenstva)
Committee memberJože Flašker (član povjerenstva)
strani drzavljanin: Nije dostupno
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2013-06-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Universal decimal classification
(UDC)		621 - Mechanical engineering. Nuclear technology. Machinery
53 - Physics
Abstract
U radu je istraživan par materijala koji nije uobičajen za izradu pužnih prijenosnika, visokokvalitetni čelik 16MnCr5 i aluminijska bronca CuAl10Fe5Ni5, koja je inače uobičajeni materijal za izradu kliznih ležajeva jer se pokazala kao dobar izbor. Na modelnom uređaju Timken izmjereni su faktor trenja za različite uvjete rada, Hertzov pritisak i brzina klizanja. Računalnom obradom metode odzivne površine dobivena je jednoznačna funkcija preslikavanja. Numerička je analiza također pokazala da ne postoji jednoznačna veza između trošenja, faktora trenja, Herzova pritiska i brzine klizanja. Numeričkom integracijom procijenjena je korisnost pužnog para, koja je i potvrđena mjerenjem na realnom prijenosniku. Mjerenje na pužnom prijenosniku pokazalo je da je granični moment opterećenja 150 Nm, što odgovara prosječnom Hertzovu pritisku od 180 MPa. To je ograničenje nametnula kombinacija materijala pužnog kola i maziva tj. pojava tribokorozije.
Abstract (english)
The paper deals with a pair of materials which are not commonly used to make worm gears, i.e. high quality steel 16MnCr5 and aluminum bronze CuAl10Fe5Ni5. The latter is a material commonly used to make plain bearings as it has been shown that it is a good choice. The friction factor for different operating conditions, the Hertz contact stress and sliding speed have been measured on the model unit Timken. The unambiguous mapping function has been obtained by computer processing of the response surface method. The numerical analysis has also shown that there is no unambiguous link between wear, friction factor, the Hertz contact stress and sliding speed. The efficiency of the worm gear pair has been assessed by the numerical integration and confirmed by measurements carried out on the real gear.The measurements of the worm gear have shown that the limit load torque is 150 Nm, which corresponds to the mean Hertz contact stress of 180 MPa. This limitation is imposed by tribocorrosion, i.e. the combination of the worm wheel material and lubricants.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:432847
Study programmeTitle: Mechanical Engineering and Naval Architecture
Study programme type: university
Study level: postgraduate
Academic / professional title: doktor/doktorica znanosti, područje tehničkih znanosti (doktor/doktorica znanosti, područje tehničkih znanosti)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-05-04 07:19:10